| Customization: | Available |
|---|---|
| Condition: | New |
| Color: | Silver |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The cattle crush comes with head bail and sliding gate panels.It is necessary farm equipment for the dairy farm. Usually, the galvanizing free stall with galvanized headlock and cow rubber mat used in combination.It is ideal for the farmer to gain easy access to cattle with a minimum of stress to the animal.
| Head bail | With auto-wrench Pre galvanized, zinc coating 100g/m2 Fully 360degree welded, 1970mm high, 850mm wide Internal width is 750mm(does not including vertical tube) All the tubes are 50x50x1.6mm square tubes Galvanized sheet, With welded caps |
1 piece |
| Sliding gate | Sliding gate x 1 Pre hot dipped galvanized, zinc coating 100g/m2 1970mm high, 850mm wide Frame tube: 50x50x2mm Internal width is 750mm(does not including vertical tube) 6 Rail of 40x80x1.6mm with the rail evenly spaced Big Pulley: 3 sets per door A small rubber wheel in the bottom Handle:32mm round pipes Auto lock rear sliding gate Innovative silent operation With welded caps 1 flat feet Easy operation with roller sliding With 8 U lugs: 100x60x4mm |
1piece |
| Crush panel | Cattle crush side panel Cattle panel on one side Ideal for use with two cattle panels and a sliding gate to create a budget crush Pre galvanized, zinc coating 100g/m2 Fully 360degree welded 1970mm high, 2200mm long. All the tubes are 50x50x2mm With 7 rails, 4 rails with galvanized sheet, 3 rails are not. Galvanized sheet is 1.0mm thick. With caps, lugs and pins Cattle panel gates on the other side Total 2000mm high, 3050mm long. All the tubes are 50x50x2mm Total 4 doors, with spring latched lock Long ratchet rump bar mechanism Longer door, inertnal wide is 1995mm Smaller door, internal wide is 725mm Triple top gates allowing full access along animal With caps, lugs and pins |
1 set |
){kind=link}